info@designmind.co.za 083 454 1620

logo

 

LOGIN INTO YOUR ACCOUNT

 

INTERIOR AND DECOR NEWS

All news Interior & Decor News Design News Landscape News Property News Build News
 
Friday, 04 December 2015 08:27

Make your own trestle desk

Written by 
Rate this item
(0 votes)
Home Dzine| Home Dzine| |

What makes this project simple is that you use a ready-made pine slat door and a couple of pine trestles - all of which you will find at your local Builders Warehouse. However, making your own basic pine trestles will cut down on the total cost to make this trestle desk.

Pine slat door (new or reclaimed)
2 pine trestles (or make your own)
4 of PAR pine 20 x 69mm x 2400mm length
4 x 35mm cut screws
Woodoc gel stain (antique oak)
Wood filler (to match colour of stain)
Plascon Ultra varnish (suede or gloss) and paintbrush

TOOLS:
Jigsaw, mitre saw or circular saw
Drill / Driver plus assorted bits
Countersink bit
120- and 240-grit sandpaper
Tape measure and pencil

1. To make the shelves: measure and mark two lengths of pine into six equal pieces 400mm long. Measure and mark a third pine plank into 2 pieces 400mm long and 2 pieces 800mm long. Cut these sections and sand smooth.

GOOD TO KNOW:

It is easier to stain all the pieces before assembly. If you are using Woodoc Gel Stain apply this with a cloth, but use a paintbrush for waterbased stains or tinted varnish. Pop on rubber or disposable gloves to protect your hands.

2. To make the shelves that fit at the bottom of the trestles  place 7 cut pieces on a flat surface. Allow 50mm gaps between the pieces so that  the overall length measures 800mm (or the total length of the trestles). Centre the 800mm piece on top and drill two pilot holes over the bottom pieces.  Secure the top plank in position with 35mm screws. Repeat for the other trestle.

3. Stain the completed trestles and adjust the rope so that the 400mm-wide shelf is adequately supported.

4. Cut the remaining piece of PAR pine to the length of the door. Drill four countersunk pilot holes along the total length and attach this to the front edge of the door using 35mm screws.  

5. Do any final sanding and wipe clean. Pop on your gloves to stain the finished desk top and then apply two coats of polyurethane varnish for ultimate protection for your new trestle desk.  Allow each coat of varnish to dry completely (preferably overnight) before applying the second coat.

 

Additional Info

  • Source: Home-Dzine
  • Website: www.home-dzine.co.za
Read 2059 times
DesignMind

A smart digital space to market your building service or solution

List first to get ranked first!

DesignMind is a free on-line market space that showcases building or interior design services, building and installation services and building products and solutions in one easy to search on-line space. The site makes it quick and easy for anyone to source a range of products and services that meet any need or application – and simple to geo-locate and connect with the closest suppliers in seconds.

Suppliers get a suite of modern media tools to list solutions and to post content and news - and the functions to self-manage profiles and product and service pages hosted on the site. Requests for quotes, service or information get routed to suppliers Inboxes instantly.

Smart on-line marketing in a box
The most effective and efficient way for suppliers and customers to connect

Get seen. Showcase your products, services, search tags, images and information in our easy-to-use solutions directory and get found in keyword searches instantly. Update your information anytime.

Get pinned. Show up on our map in searches for the closest supplier or service provider. Every product or service listed gets geo-tagged automatically. Your pin links to your solution and contact info.

Get leads. A service request button on every solution page you create makes it easy for anyone to ask for a quote, service or more information. Leads get routed to your Inbox instantly.

Get liked. Our visitors recommend, share and rank solutions they like, giving others the function to source the most liked or best ranked options - and the peace of mind that good references offer.

Get noticed. Use our smart publishing engine to push your news and information to the audiences you’re targeting. Get featured in our weekly newsletter, Facebook, Twitter and iPad App spaces.

Get Ad space. Advertise anything on promotion or special for free. Your special offer gets found in keyword or category searches - or located in searches for specials in a specific area.

Get networking. Use our free trade networking service to make industry contacts and share information. Our smart social media tools make it easy to interact with contacts.

Related items

  • Metallics are hot!

    Metallics are making a huge comeback in interior design, and lighting is no exception, says Melissa Davidson from leading lighting retailer, The Lighting Warehouse. She goes on to add: “Adding a touch of metallic to your interior décor composition is a great way to making the space in question infinitely more glamorous. However, too much, and the space will look too cold, hard and uninviting. Like most things, incorporating metallic is all about striking the perfect balance.”

    Melissa says lighting is the perfect way of introducing metallics into your home, décor as they can stand proud as both functional, and aesthetically beautiful statement pieces: “Metallic lighting reflect light and many times open up a space, and it almost always gives a dull room a more interesting appeal and unexpected magnetism.” She offers her top tips on how to incorporate metallics into your home, without going overboard:

    1. The soft touch: Mix metallics in with different, softer textures to balance them out.
    2. A neutral palette: A neutral monochromatic colour palette will really make the metallic lighting you use stand out. Metallics pair fantastically with darker hues that are so in vogue at the moment, such as grey, black, navy or a variety of deep, rich jewel tones. Alternatively, you can keep the palette light and bright, with a variety of shades of white.
    3. Like attracts like: Try and use the same form of metallic throughout, such as brass for example, but mixing it up in various finishes or textures.
    4. Start small: It is a better idea to incorporate small doses of metallics into your décor, instead of choosing one large permanent piece that can often be a little overwhelming. Small accent pieces and lighting is a great place to start – as they are easy to interchange and move around until you find the perfect balance.
  • Modular Building System

    Modular Building System

    Modular Building System

    Modular Building System - moladi

    Established in 1986, moladi has developed modular building system addressing the basic need for durable quality housing which is a viable affordable alternative to traditional building methods.
    Representing the most advanced technology and innovations in industrial construction of affordable low-cost housing, schools clinics and other structures, with years of experience in the industry our knowledge has inspired subsequent ulterior solutions for development.

    Lack of resources, insufficient funds, skills shortage, time constraints, work flow control and waste are key challenges embodied in affordable housing shortages. Our technology addresses these issues and this is why individuals and organisations recognise moladi as the solution to housing needs throughout the world.

    For more information - Visit Modular Building System

  • Italy’s biggest tile expo reminds us that design is in the details

    Liza Watermeyer, Retail Display Manager of Tile Africa, lets us in on the design and renovation trends showcased at the exclusive International Cersaie Exhibition

    Every year, Tile Africa sends a team of experts to Cersaie, the international exhibition of ceramic tile and bathroom furnishings, which takes place in Bologna, Italy. It’s the perfect aesthetic setting after all, one of the first tiled floors, designed by a celebrated artist, was placed in the chapel of San Petronio in Bologna in 1487.

    Cersaie offers industry leaders an insider preview of what to look forward to when it comes to new trends in tiles, bathroom and interior design. “For us, it ensures we’re always on top of those trends,” says Liza Watermeyer, Retail Display Manager of Tile Africa, who attended the exhibition. “Most exhibitors had beautiful lifestyle settings, transporting you into a space that would inspire anyone to start renovating,” says Liza.

    Now back home in South Africa, Liza shares what’s in store when it comes to tiling and bathroom design.

    It’s in the details!

    When it comes to beautiful design, it’s all about the details. Well thought out, considered details are being used across décor and design, to truly transform the sensory experience. “Finer details appeal to the customer, because they allow you to create an individual, bespoke look in your home or workplace,” says Liza.

    In the bathroom…

    Bathrooms will be beautifully designed with practicality in mind. Look out for baths and basins made from materials that are resistant to stains, retain heat, have sustainable qualities and can be custom built. “We saw a lot of adaptable bathroom furniture that can fit together, the perfect solution for smaller bathrooms.” says Liza. “Mix a vanity with a shelf, for example. Whatever works for your space and lifestyle!”

    When it comes to tiles, bathrooms are getting a lot of attention, with interesting combinations of field tiles (larger, usually floor tiles) being mixed with smaller tiles. If you’re looking for something a little more special, create patterns; the future of tiles will be all about texture. Go for a mosaic or branch out with 3D tiles, prints, patterns or metallic foil details. As for the colour? Go darker than neutral; brown and black featured across all styles.

    In the kitchen… and living room

    When it comes to design, we’re still seeing a lot of blurred lines between the living room and the kitchen. We love to eat, work, cook and live in the same space, and fittings and furnishings need to be agile to cater for different uses. Mixing looks and sizes provides interest when integrating these spaces.

    Tiling your kitchen? Glazed ceramics like metro and brick-shaped tiles in interesting materials like glass, cement, wood and stone are perfect for your walls. This allows you to play with your kitchen aesthetics, whether it’s futuristic, vintage industrial or naturally beautiful.

    Large format, rectangle porcelain tiles, in the 1200 x 600mm size, are the ultimate in trend forward floor applications. Others sizes to keep in mind are 600 x 600mm and 800 x 800mm. These formats are available in matt, gloss and lapatto surfaces. The looks include, marble, cement and stone. Soft wood look planks, mixed with these looks and forming part of the tilling layout, are also a key trend for the floor. Mixing looks and sizes provides interest and solutions when integrating these spaces.

    In your outdoor area…

    The big trend to look for when renovating your outdoor area is anything linked to nature. Natural stone, stone-look tiles and wood-look tiles would all work outdoors – and are very popular at the moment. But, again, we’re looking to practicality too. Porcelain products can withstand extreme weather conditions and slip-resistant tiles, in stone and cement, are a must – especially around a pool. “Mix stone and cement for an eclectic style, or use the cement look on its own, to create a no-fuss Modern Metro Style,” says Liza.

    It’s clear that trends are moving in the direction of sustainable, agile spaces. We’re celebrating unique living spaces that work with our lifestyles. Keep your renovations bespoke, practical and environmentally sound. “Craftsmanship is valued, as is a need to conserve the resources we have left. These must be considered hand-in-hand with our style choices,” says Liza.

    The greatest takeaway from Cersaie is to be bold, and not be afraid to experiment with colour, material and more. Eclectic beats uniform, and as long as you focus on the details, you can proudly make your own unique mark on your spaces. 

  • Snazzy headboard with fabric scraps

    Here's a great way to use up fabric scraps, or fabric from the bargain bin, to make a snazzy headboard that is colourful and eye-catching.

    Make a colourful headboard with a patchwork-effect using scraps of fabric or fabric from the bargain bin at your local fabric store, some thin foam, and a few tools and supplies available at your local Builders.

    Fabric scraps to make the size of headboard you require

    Thin foam for the patchwork squares (approx. 2cm thick)

    BisonBord - cut to the size of your headboard

    3mm Masonite or Hardboard - cut for the individual squares

    Sprayable adhesive

    20mm screws

    Roll of duct tape

    Bosch Tacker or heavy-duty staple gun

    Keyhole brackets and screws to mount onto the wall

    1. Determine the size of the headboard required for your particular bed and then divide this into equal sections for the patchwork squares. Have the BisonBord and Masonite or Hardboard cut to fit. Mark the layout for the squares on the BisonBord, on what will be the back of the headboard.

    2. Cut the foam to the size of the individual Masonite or Hardboard squares and secure to the board with sprayable adhesive.

    3. Cut the scrap fabric to fit over the top and sides of the square, allowing just enough for the fabric to be stapled at the back of each square. Make sure that the staples do not protrude too much - tap with a hammer to flatten if necessary.

    4. Line up the wrapped squares face down in your desired pattern. Use duct tape to attach the squares together and hold the pattern in place.

    5. Using the drawn guide on the back of the headboard [1 above], use 20mm screws to attach the squares to the front of the headboard. Use 2 screws per square.

    6. Attach keyhole brackets to the back of the BisonBord to hang the headboard on the wall.

    GOOD TO KNOW: If you need to cover up the edges of the BisonBord, use iron-on or glue on edging strips in a colour that complements the finished colours of your headboard.

  • Waterproof a shower

    Failed or poor waterproofing is often to blame for tiling failures, leaks and costly repairs. Bear in mind that tiling itself is not inherently waterproof, and therefore it is essential to have properly detailed and installed waterproofing behind tiled surfaces.

    TAL shares practical advice on how to waterproof a shower with TAL’s Sureproof flexible and seamless rapid-setting two-component waterproofing system.

    GOOD TO KNOW: Allow plenty of time to complete this project, as the waterproofing system requires about 24 hours to dry before tiling can commence.

    Preparation

    Start the process by priming the surface and ensure it is in good condition, clean and dry, and has a moisture content of less than 5%. If necessary, the shower surface can be shot-blasted to give the tile adhesive extra grip, before being sealed with a layer of TAL Floor Primer. If the existing surface is dense and smooth, apply a slurry comprising TAL Floorkey and TAL Rapidfix.

    1. It is important to allow for any movement. Apply a 10mm bead of sanitary silicone to all internal corners and joints around the floor waste, taps and rose plumbing.

    2. Combine the two ingredients of TAL Sureproof together. Use a mechanical mixer or attach a mixer to your drill.  Add the powder to the liquid and mix until a creamy, lump-free consistency is obtained. Allow the mix to stand for three minutes and then stir again.

    3. Apply the first coat of TAL Sureproof to the wall and floor corners. Immediately bed the TAL Sureproof Membrane (200mm wide) into the wet Sureproof [see below]. The Sureproof Membrane must be pushed into the corners, ensuring the entire interface is covered with the membrane. Ensure there are no wrinkles or air bubbles trapped beneath the membrane.

    4. Apply a second coat of TAL Sureproof to saturate the membrane completely before the first coat dries.

    5. Where the waste is flush with the floor, place the membrane around and down into the waste.

    6. For the main shower wall and floor surfaces, apply the first coat of TAL Sureproof to the dry, primed surface with a short hair paint roller or brush, and allow approximately two hours to dry. Apply the second coat in a different direction to ensure complete coverage, avoiding air entrapment or pinholes. Allow the TAL Sureproof system to dry for 24 to 36 hours before fixing the tiles.

    When tiling, modify the tile adhesive and grout with TAL Bond Powder or Bond Liquid to add flexibility and water resistance to the tiling installation, and apply a silicone sealer to all the perimeter joints.

    GOOD TO KNOW: Use of the shower is not recommended for 72 hours after completion of the tiling to ensure that the installation has cured fully.

    As a final touch, seal the grout joints with TAL Grout Sealer. This will ensure your newly-installed shower not only looks good, but is also easy to clean. If in any doubt visit www.tal.co.za

Leave a comment